Valid HTML 4.01! linux resources Thinkpad R50 1836-2RU MALTA (MIPS24k) Resource page Thinkpad R50 1836-2RU linux resources Valid HTML 4.01!
FTP to mips24k.com FTP to mips24k.com as u37793639-SAEmployee
Note: opens a new windows; Password required.
MALTA (MIPS24k) Resources MALTA (MIPS24k) Resources
Scientific-Atlanta Collaboration Scientific-Atlanta Collaboration
(internal access only)
MIPS Corporation MIPS Corporation
Linux on MIPS (linux-mips.org) Linux on MIPS (linux-mips.org)
Linux Install preparation log Output log: Prepare Malta board for Linux Install program
Linux Install configure log Output log: load of Linux Install (via tftp); hda format; configuration and setup of Linux on Malta board.
Linux boot from tftp log Output log: tftp load of Linux kernel and run after install/configure.
Linux Install images to hda log Output log: tftp load of Linux kernel; write to disk and later disk load of Linux kernel; alternate way to load kernel without tftp always running.
free Win32 Telnet and SSH client (putty.zip) a free Win32 Telnet and SSH client (putty.zip)
A tFTP server for Microsoft™ Windows.
win32 Tiny FTP server (tftp32d.zip) win32 Tiny FTP server (tftp32d.zip)
tFTP Install/use for Malta tFTP Install/use for Malta Board
FTP Site (SA Local only) of resources
   Primary FTP 172.18.31.185 (CobbA_Englab01)
   Secondary FTP 172.18.29.236 (CobbA-Linux)
Doc#
Document Title (internal access only)
Rev.
MD00051Malta™ Developer's Kit Getting Started
01.06
MD00048Malta™ User's Manual
01.05
MD00008YAMON™ User's Manual
02.06
MD00009YAMON™ Reference Manual
02.06
MD00032YAMON™ Errata Sheet
02.11
MD00049Malta™ Schematic
03.00
MD00050Malta™ Errata / Functional Change Sheet
01.04
MD00007CoreLV™ User's Manual
02.08
MD00023CoreLV™ Schematic
02.00
MD00034CoreLV™ Errata/Functional Change Sheet
10.02
MD00006CPU Card (w/QED RM5261 Processor) User's Manual
02.03
MD00022CPU Card (w/QED RM5261 Processor) Schematic
03.01
MD00038CPU Card (w/QED RM5261 Processor)
   Errata/Functional Change Sheet
10.01
MD00057CoreLV 20Kc™ User's Manual
04.01
MD00066CoreLV 20K™ Schematic
04.00
MD00219CoreLV 20Kc™ Errata Sheet
01.02
MD00116CoreFPGA™ User's Manual
01.00
MD00119CoreFPGA™ Schematic
01.00
MD00129CoreFPGA™ Errata/Functional Change Sheet
01.01
MD00370CoreFPGA™ 2 User's Manual
01.01
MD00317CoreFPGA™ 2 Schematic
01.00
MD00363CoreFPGA™ Rev 2.0 User's Manual
01.01
MD00371CoreFPGA™ Rev 2.0 Schematics
01.00
MD00141Malta™ Developer's Kit:
   Getting Started with Windows(R) CE.NET™
02.09
MD00071EJTAG Implementation Application
01.00
MD00047EJTAG Specification
03.10
MD00148EJTAG Trace Control Block Specification
01.04
MD00412Microprocessor Debug Interface (MDI) Specification
02.12
MD00071MIPS(r) SDE Programmer's Guide
01.12

FTP to ftp.mips24k.com as u37793639-SAEmployee
Note: the link will open a new windows and require a Password.
 Boot Output from current Malta board: 
YAMON ROM Monitor, Revision 02.06.
Copyright (c) 1999-2004 MIPS Technologies, Inc. - All Rights Reserved.

For a list of available commands, type 'help'.
Compilation time =              Mar 23 2004  16:51:05
Board type/revision =           0x02 (Malta) / 0x00
Core board type/revision =      0x07 (CoreFPGA-2) / 0x00
System controller/revision =    MIPS SOC-it 101 OCP / 1.3   SDR-FW-1:1
FPGA revision =                 0x0001
MAC address =                   00.d0.a0.00.04.2a
Board S/N =                     0000000818
PCI bus frequency =             33.33 MHz
Processor Company ID/options =  0x01 (MIPS Technologies, Inc.) / 0x00
Processor ID/revision =         0x93 (MIPS 24Kc) / 0x64
Endianness =                    Big             (was Little Endian, set S5-2 to On/Closed)
CPU/Bus frequency =             25 MHz / 25 MHz (Install jumper on JP4-3,4 (middle pins) to set
Flash memory size =             4 MByte           PCI Bus to 25MHz, odd failures if at 33MHz)
SDRAM size =                    256 MByte       (replace 64MB DIMM with 256MB)
First free SDRAM address =      0x800b36d0

 Environment values (for tFTP boot load of Linux Installation package) from current Malta board: 
YAMON> setenv

baseboardserial (RO)   0000000818               (Linux v2.4.18 Big Endian MIPS24k Malta)
bootfile        (R/W)  vmlinux-2.4.18.malta.install.eb.01.03.srec
bootprot        (R/W)  tftp                     (default bootload is tFTP..
bootserport     (R/W)  tty0                      ..ensure sure bootfile is available on server)
bootserver      (R/W)  172.18.29.236            (must match your tFTP server IP)
cpuconfig       (R/W)
ethaddr         (RO)   00.d0.a0.00.04.2a
fpu             (R/W)
gateway         (R/W)  172.18.29.254            (default gateway)
ipaddr          (R/W)  172.18.29.237            (Malta board configured for 172.18.29.237)
memsize         (RO)   0x10000000               (replace 64MB DIMM with 256MB)
modetty0        (R/W)  38400,n,8,1,none         (leave at 38.4kbaud
modetty1        (R/W)  38400,n,8,2,none           required by YAMON, Linux)
prompt          (R/W)  YAMON
start           (R/W)                           (No auto-start command for install)
startdelay      (R/W)
subnetmask      (R/W)  255.255.255.0
yamonrev        (RO)   02.06

 Environment values (for tFTP boot load of Linux kernel) from current Malta board: 
YAMON> setenv

baseboardserial (RO)   0000000818               (Linux v2.4.18 Big Endian MIPS24k Malta)
bootfile        (R/W)  vmlinux.kernel.srec      (link the Big-Endian kernel 2.4.18.malta srec)
bootprot        (R/W)  tftp                     (default bootload is tFTP..
bootserport     (R/W)  tty0                      ..ensure sure bootfile is available on server)
bootserver      (R/W)  172.18.29.236            (must match your tFTP server IP)
cpuconfig       (R/W)
ethaddr         (RO)   00.d0.a0.00.04.2a
fpu             (R/W)
gateway         (R/W)  172.18.29.254            (default gateway)
ipaddr          (R/W)  172.18.29.237            (Malta board configured for 172.18.29.237)
memsize         (RO)   0x10000000               (replace 64MB DIMM with 256MB)
modetty0        (R/W)  38400,n,8,1,none         (leave at 38.4kbaud
modetty1        (R/W)  38400,n,8,2,none           required by YAMON, Linux)
prompt          (R/W)  YAMON
start           (R/W)  load;go . root=/dev/hda3 (there are several reasons why; see log)
startdelay      (R/W)
subnetmask      (R/W)  255.255.255.0
yamonrev        (RO)   02.06